Hi Steven,
The problem is in what you're trying to do: Route with a switch.
There's a couple of ways to fix it.
If they're all in the same subnet, then you can usually* cheat somewhat
by putting ports in both the internet and user or internet and dev
groups, but it's the "wrong" way to do it, at least in my eyes.
The "proper" way is to have a router, that lives on all 3 VLANs and
subnets, and then have it manage the routing between them all.
Hope this helps.
Chris
* Usually AKA, on some switches, when the people actually bothered to
implement vlans properly.
On Tue, 20 Dec 2011 14:17:24 +0000, Steven Swann wrote:
> Hello all,
>
> Does anybody here have any experience in setting up VLANs on a HP
> ProCurve switch? I am able to set up three different VLANs, one for
> internet, one for users and one for development. The problem is that
> I
> want to allow both the users and developers access to the internet
> VLAN since this is connected to the ISP router.
>
> I have the core of it set up as required, the problem seems to be the
> routing between VLANs...
>
> Any ideas?
>
> Best Regards,
>
> Steven Swann
>
> --
> Please post to: Hampshire@???
> Web Interface: https://mailman.lug.org.uk/mailman/listinfo/hampshire
> LUG URL: http://www.hantslug.org.uk
> --------------------------------------------------------------
--
Please post to: Hampshire@???
Web Interface:
https://mailman.lug.org.uk/mailman/listinfo/hampshire
LUG URL:
http://www.hantslug.org.uk
--------------------------------------------------------------
