On Mon, Mar 31, 2008 at 12:33 PM, Graeme Hilton
<graeme.hilton@???> wrote:
> I plug in the disk and power it up and I get:
> usb 1-5.1: new high speed USB device using address 7
> in dmesg and
> Mar 31 12:30:08 dhcp-187-158 kernel: usb 1-5.1: new high speed USB device
> using address 7
> in /var/log/messages, but no mention of where it's put it in the /dev
> heirarchy.
Have you got usb mass storage stuff compiled into your kernel / moules
loaded? This is the successfull output with 2.6.24, and it looks like
that's what's next.
usb 1-6: new high speed USB device using ehci_hcd and address 4
usb 1-6: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access QUANTUM FIREBALL SE2.1A API. PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] 4124736 512-byte hardware sectors (2112 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 4124736 512-byte hardware sectors (2112 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: unknown partition table
sd 4:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
--
Richard Brown
