----- Original Message ----- 
From: "John Cooper" <lug@???>
To: "Hampshire LUG Discussion List" <hampshire@???>
Sent: Wednesday, December 26, 2007 3:52 PM
Subject: Re: [Hampshire] FC8 X11 problem - GeForce 8400
> Rob Malpass wrote:
>> Hi all
>>
>> Can anyone suggest a good tutorial on X11?   I'm playing with FC8 and
>> thus far, I can't get the installer to recognise the GeForce 8400
>> installed. I've tried a few commands from my (fallable) memory like
>>
>> Xorg -configure
>> xf86config
>>
>> and so on, bnt I'm a bit rusty.   At present, I can't even post the
>> output from the logs (without physically writing it down or kvm'ing it
>> from one box to another).
>>
>>
>>
> You can try the install in console mode and then change the xorg.conf
> later once fully installed using
>
> system-config-display
>
> Alternatively change the "Device" part driver to "Driver nv" and "init
> 3;init 5" or just reboot.
>
> My /etc/X11/xorg.conf
>
> # Xorg configuration created by system-config-display
>
> Section "ServerLayout"
>        Identifier     "single head configuration"
>        Screen      0  "Screen0" 0 0
>        InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "InputDevice"
>        Identifier  "Keyboard0"
>        Driver      "kbd"
>        Option      "XkbModel" "pc105"
>        Option      "XkbLayout" "gb"
> EndSection
>
> Section "Device"
>        Identifier  "Videocard0"
>        Driver      "nv"
> EndSection
>
> Section "Screen"
>        Identifier "Screen0"
>        Device     "Videocard0"
>        DefaultDepth     24
>        SubSection "Display"
>                Viewport   0 0
>                Depth     24
>                Modes    "1280x1024" "1280x960" "1280x800" "1280x720"
> "1152x864" "1024x768" "800x600" "640x480"
>        EndSubSection
> EndSection
>
>
> -- 
Thanks - I've tried editing the xorg.conf as well as that as well as 
system-config-display and the kmod-nvidia suggested by James - no dice. 
Can anyone tell me what diagnostics I need to look at (or post)?
FWIW it's a Zotac Nvidia GeForce 8400 (PCI Express).   The motherboard does 
have onboard graphics which I've not been able to disable (can't find a BIOS 
setting) so when probing, it tries on VideoCard0 and VideoCard1, but nothing 
from either.   Not sure how (un)important that might be.
Cheers
Rob